Date:15/6/2020
Title: Expected Cost
After done with my methodology on the previous week, so this week I have make some expected cost of the hardware/component that i will used in my project. Within this week also i have crate expected result for my project that can be put on my thesis in chapter 4.
 |
Title: Expected result Expected
result The Arduino will collect data from ultrasonic sensor
every second. It measured 3 different water level distance ranged from more
than 12 cm which is normal, 9cm until 12 cm is moderate and less than 9cm is
high. All the collected data will be display on IoT platform which is
Thingspeak and Blynk application through esp8266 WI-FI module. Then LCD will be
reflecting the level indicator as well as the distance of the water and
displays on the widgets which used LED as the indicator (green for normal,
yellow for moderate and red for high). Table below show the tabulates the range
of level indicator that indicates the distance of sensor for safety purposes.  |
No comments:
Post a Comment